Đặng Hiền Hòa
(Vịt)
New Member
[font=Verdana, Arial, Helvetica, sans-serif]
[/font]
[font=Verdana, Arial, Helvetica, sans-serif]This is gonna be fun![/font]
[font=Verdana, Arial, Helvetica, sans-serif]There are so many things you can do while making different kinds of wires, and here I'll show you a few techniques that will get you started.[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Ok - open up a new document, or an existing document you want to add the wire to. Create a new layer called WIRE. Then use the Pen Tool
to create the shape of your path.[/font]
[font=Verdana, Arial, Helvetica, sans-serif]
[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Then select the Brush Tool
and select a 13 pixels soft brush. Make sure you have White as your foreground color and switch from Layers to Channels. Create a new channel (Alpha 1). Then select the Pen tool again and right click the path and choose Stroke Path - Brush - OK. Your image should now look like mine in step 2.[/font][font=Verdana, Arial, Helvetica, sans-serif]
[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Now go to Image - Adjustments - Levels - and drag the right and left arrows to the center until your image looks nice and sharp.
Click here to see my settings.
(You could always just stroke the path in step 2 with a solid brush - I'm just used to doing it this way - think it gives really smooth edges...)[/font]
[font=Verdana, Arial, Helvetica, sans-serif]
[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Duplicate the Alpha 1 channel by dragging it down to the Create New Channel tab.
Hit Ctrl + the Alpha 1 layer to load its transparency. Then go to Blur - Gaussian Blur - 3 pixels.[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Keep your selection.[/font]
[font=Verdana, Arial, Helvetica, sans-serif]
[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Ok - switch back to Layers again. Activate the WIRE layer.
Fill you selection with a gray color (#4B4B4B).
Then go to Filter - Render - Lightning Effects and enter these settings.
Still keep your selection.
[/font][font=Verdana, Arial, Helvetica, sans-serif]
[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Create a new layer and call it PATTERN.
Hit D to set the default colors (black as foregorund color).
Activate the Brush tool
and select the 18 pixels circle brush. If you don't see it in your brush palette hit the arrow on the top right and load the "Assorted Brushes".
Then select the Pen tool
and right click the path. Chose Stroke Path - Brush - OK.
Deselect.
Your image should now look like mine in step 6.
[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Now still at the PATTERN layer do a Filter - Sharpen More. This will make the pattern layer nice 'n crispy[/font]
[font=Verdana, Arial, Helvetica, sans-serif].[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Then just add a nice Drop Shadow layer style to the WIRE layer and you're done![/font]
[font=Verdana, Arial, Helvetica, sans-serif]Ok - I'll just give you a few more examples to show you how you easily can change the look of the wire.[/font]
[font=Verdana, Arial, Helvetica, sans-serif]To achieve the effect shown in step 8 I just added this Bevel and Emboss layer style to the PATTERN layer.[/font]
[font=Verdana, Arial, Helvetica, sans-serif]And to achieve the effect shown in step 9 I added this Bevel and Emboss layer style to the PATTERN layer.[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Final example.
The wires to the left are the same wire as in step 9. I've just added a Stroke layer style to the WIRE layer - 1 pixel - Outside - Color Black.[/font]
[font=Verdana, Arial, Helvetica, sans-serif]To make the wire green I just added a Hue/Saturation adjustment layer to the WIRE layer with these settings.
PS! Be sure you check the Colorize option.
Source[/font]
[font=Verdana, Arial, Helvetica, sans-serif]This is gonna be fun![/font]
[font=Verdana, Arial, Helvetica, sans-serif]There are so many things you can do while making different kinds of wires, and here I'll show you a few techniques that will get you started.[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Ok - open up a new document, or an existing document you want to add the wire to. Create a new layer called WIRE. Then use the Pen Tool
[font=Verdana, Arial, Helvetica, sans-serif]
[font=Verdana, Arial, Helvetica, sans-serif]Then select the Brush Tool
[font=Verdana, Arial, Helvetica, sans-serif]Now go to Image - Adjustments - Levels - and drag the right and left arrows to the center until your image looks nice and sharp.
Click here to see my settings.
(You could always just stroke the path in step 2 with a solid brush - I'm just used to doing it this way - think it gives really smooth edges...)[/font]
[font=Verdana, Arial, Helvetica, sans-serif]
[font=Verdana, Arial, Helvetica, sans-serif]Duplicate the Alpha 1 channel by dragging it down to the Create New Channel tab.
Hit Ctrl + the Alpha 1 layer to load its transparency. Then go to Blur - Gaussian Blur - 3 pixels.[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Keep your selection.[/font]
[font=Verdana, Arial, Helvetica, sans-serif]
[font=Verdana, Arial, Helvetica, sans-serif]Ok - switch back to Layers again. Activate the WIRE layer.
Fill you selection with a gray color (#4B4B4B).
Then go to Filter - Render - Lightning Effects and enter these settings.
Still keep your selection.
[/font][font=Verdana, Arial, Helvetica, sans-serif]
[font=Verdana, Arial, Helvetica, sans-serif]Create a new layer and call it PATTERN.
Hit D to set the default colors (black as foregorund color).
Activate the Brush tool
Then select the Pen tool
Deselect.
Your image should now look like mine in step 6.
[/font]
[font=Verdana, Arial, Helvetica, sans-serif][font=Verdana, Arial, Helvetica, sans-serif]
[/font][/font]
[font=Verdana, Arial, Helvetica, sans-serif]Now still at the PATTERN layer do a Filter - Sharpen More. This will make the pattern layer nice 'n crispy[/font]
[font=Verdana, Arial, Helvetica, sans-serif].[/font]
[font=Verdana, Arial, Helvetica, sans-serif][font=Verdana, Arial, Helvetica, sans-serif][font=Verdana, Arial, Helvetica, sans-serif]
[/font][/font][/font]
[font=Verdana, Arial, Helvetica, sans-serif]Then just add a nice Drop Shadow layer style to the WIRE layer and you're done![/font]
[font=Verdana, Arial, Helvetica, sans-serif]Ok - I'll just give you a few more examples to show you how you easily can change the look of the wire.[/font]
[font=Verdana, Arial, Helvetica, sans-serif]To achieve the effect shown in step 8 I just added this Bevel and Emboss layer style to the PATTERN layer.[/font]
[font=Verdana, Arial, Helvetica, sans-serif]And to achieve the effect shown in step 9 I added this Bevel and Emboss layer style to the PATTERN layer.[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Final example.
The wires to the left are the same wire as in step 9. I've just added a Stroke layer style to the WIRE layer - 1 pixel - Outside - Color Black.[/font]
[font=Verdana, Arial, Helvetica, sans-serif]To make the wire green I just added a Hue/Saturation adjustment layer to the WIRE layer with these settings.
PS! Be sure you check the Colorize option.
Source[/font]
Chỉnh sửa lần cuối:
